CABOT ACRY EXT PRIMER, WHITE, 1 GA
$59.99
Cabot Problem-Solver 140.0008022.007 Exterior Primer, White, 1 gal Cabot® Problem-Solver® acrylic primer is an acrylic-based, exterior primer that is specially formulated with LokzAll™ stain locking technology. This unique formula chemically bonds with extractive tannin bleed and locks the unsightly discoloration into the primer. The result is a surface that can be top coated and will be protected from discoloration. This state-of-the-art chemistry also provides resistance to mildew stains and moisture problems. Its acrylic formula remains flexible, resisting cracking, peeling or blistering. Recommended for use on new or previously stained surfaces including wood siding, trim, shingles, decks, plywood, manufactured hardboard, engineered wood products, cured stucco, masonry, brick, cementitious siding, asbestos siding and smooth or rough-sawn surfaces. It is suitable for use on woods such as redwood, red cedar, fir, pine, cypress, spruce and incense cedar. Available in water or solvent-based formulas Exceptional adhesive properties Bonds with extractive tannin bleed to block unsightly discoloration
SKU: ORG-6267041
Additional Information
| Width: | 13.5 |
| Height: | 8 |
| Length: | 13.5 |
| Weight: | 10.2 |
| Color: | White |
| Net Content: | 1 gal |
| Compositions: | Titanium Dioxide, Calcium Carbonate, Propylene Glycol |
| Viscosity: | 80 to 85 ku |
| Pigment Type: | Calcium Carbonate, Nepheline Syenite, Titanium Dioxide |
| Vehicle Type: | Acrylic Copolymer |
| Coverage Area: | 250 to 350 sq-ft |
| VOC Content: | 100 g/L |
| Application Method: | Brush, Spray |
| Flash Point: | 205 deg F |
| Boiling Point: | 212 deg F |
| Density: | 1 |
| Specific Gravity: | 1.32 |
| Applicable Materials: | Cedar, Pine, Redwood, Spruce, Wood |
| Drying Time: | 30 min |
| pH Range: | 9 |
| Base Type: | Water |
| Application Temperature: | <50 deg F |
